Bookmark and Share

O-Rings, Kits, Silicone, O² Products 
Buna and
Viton
®
Page 1 of 2 

100% Woman Owned Corporation and  US Military Veteran
RSA has been proudly serving you for 20  years
 

 

  In USA: 800-633-4837

International: 1+757-436-7664

Fax: 757-547-2100 

 Go to Page 2 of O-Rings
 or Home Page
Reef Scuba Accessories, Inc.

Bottom of Page
More Products (Menu)


 

 

 

Viton® O-Rings (Brown)
Viton® is a registered trademark of DuPont Dow Elastomers.


Buna-N O-Rings (Black)


Reef Scuba
Deluxe O-Ring Kits

  • Select our "Deluxe O-Ring Kit" (Click Here to See on Page 2 ) in a durable double-sided waterproof marine case supplied with 10 each of  the five most commonly used o-rings, grease, and o-ring pick. We even give more extra compartments for additional o-rings that you might want to add.

  • Now, additionally, you can build your own O-Ring Kit. Mix and match with any o-rings you want--Buna or Viton.

  • You can start Building Your Own O-Ring Kit now...(Click Here)

Information You Need to Know
           about O-Rings
                  
 
  • Buna or Nitrile series is the most economical type usually found in hydraulic and plumbing shops.

  • Salt water, UV, oxygen and ozone can attack nitrile causing them to fail.

  • Viton® or FKM series is far superior than Buna and will standup better against elements that attack Buna.

  • Durameter 90 versus 70 Durameter:  The higher the number the harder of the material.

    Softer   Harder
  • Durameter is the unit of measure used by 3 different scales--the Shore A Scale is used to measure the hardness of elastomers,
    rubber like materials and plastomer materials like polyurethane.

  • There is also the D Shore and the 00 Shore which gives information pertaining  to the type of material, etc.

  • 90 Durameter can take more pressure than 70 Durameter.

  • High Pressure and Tank Necks use 90 Durameter and Low Pressure uses 70 Durameter.

 

Buna O-Rings

O-Ring
Size
O-Ring
Part #
O-Ring Application Per Pack  Price  
003 RS0003-B10 Submersible Pressure Gauge; Consoles; Internal Swivel Seal 10 $2.50
006 RS0006-B10 Common Regulator Balance Chamber; Power Inflator Stems: CO² Detonators; SAS Gland Seal 10 $2.50
007 RS0007-B10 Regulator Piston Ring; Small HP Seal 10 $2.50
008 RS0008-B10 Sonic Regulators; Regulator Piston Ring; Small HP Seal 10 $2.50
010 RS0010-B10 LP Hose/2nd Stage Interface Power Inflator Stems, Regulator Hose; Swivel End; Piston Barrel 10 $2.50
011 RS0011-B10 Low Pressure Regulator Hose: male end; regulator port plugs; hose adapters; J-Regs 10 $2.50
012 RS0012-B10 High Pressure Seat Seal, Console/Gauge hoses: male end; underneath filter; hose adapters 10 $2.50
013 RS0013-B10 Large Port; Piston Seat Seal, Survivair manifolds; Power Inflator Seal 10 $2.00
014 RS0014-B10 Standard Tank/Regulator; 2nd State Inlet Fittings; J-Regulators 10 $2.50
015 RS0015-B10 1st Stage Inlet Fittings; HP Seal Retainer; J-Value Module 10 $2.50
017 RS0017-B10 Regulator Piston Ring & Cap; Decor HP Module 10 $2.50
022 RS0022-B10 Common Regulator Piston Ring; Body Plug Seal 10 $2.50
023 RS0023-B10 Regulator LP Swivel/Seal; Body Plug Seal 10 $2.50
111 RS0111B-10 Small DIN Regulator/Valve/BC inflators/Australian/Nemrod Valves 10 $4.00
112 RS0112-B10 Din Regulator, Basal DIN Seal, Steel Tank Valve 10 $4.00
113 RS0113B-10 Aquarius Piston Ring/Cap Seal; Healthway regulators 10 $4.00
116 RS0116-B10 ½" Tank Neck, Genesis Tank Neck 10 $5.00
117 RS0117B-10 HP Cap Seal, Dacor HP Modules, Calypso Regulators 10 $5.00
210 RS0210-B10 BC Rapid Exhaust Valve 10 $6.00
214 RS0214-B10 ¾" Large Tank Neck (Alum 80, Steel) 10 $6.00

Viton® O-Rings

O-Ring
Size
O-Ring
Part #
O-Ring Application
Per Pack

 Price

 

003 RS0003-V10 HP Hose/ SPG Swivel 10 $3.00
010 RS0010-V10 LP Hose/2nd Stage Interface 10 $4.00
011 RS0011-V10 Standard 3/8" LP Port 10 $6.00
012 RS0012-V10 7/16" HP Port/ Hose Manifold 10 $5.00
013 RS0013-V10 1/2" LP Large Port 10 $6.00
014 RS0014-V10 Std Tank Yoke Regulator/ K-valve 10 $6.00
015 RS0015-V10 Tank Valve Bonnet Nut 10 Coming Soon
111 RS0111-V10 Small DIN Regulator/Valve/BC inflators/Australian/Nemrod Valves 10 Coming Soon
112 RS0112-V10 Standard DIN Regulator Valve 10 $10.00
116 RS0116-V10 ½" Small Tank Neck (Genesis) 10 $10.00
214 RS0214-V10 ¾" Large Tank Neck (Aluminum 80, Steel) 10 $12.00


 

Excellent products + great communication + excellent shipping = A++++ Seller! You gain a new customer. Thanks and keep going.”

Jose A Carrasquillo MD, MPH
PADI and SSI Master Diver
Puerto Rico, USA



The Scuba Fish Emblem

Show your pride!  This emblem fits on your car, your gear, or any surface you want.
Size is 5" long and 2¼" high. Waterproof. Actual size.



Home Page

 

 



Go to Page Two
 of O-Rings


The Pony Tamer® &The X-Bracket® Dive Reels Bungee Elastic Shock Cord
Pony Tamer Upgrade & Extra Parts Rope and Webbing 
Solid Brass Hardware Surgical Tubing Neoprene Products
Stainless Steel Hardware Scuba Tank Accessories Plastic and Rubber Products
Technical Hardware Additional  Accessories O-Rings Page 1  (You are here)
Specials New Products Health and Safety Coming Soon
In US:  800-633-4837 International:  +011-1-757-436-7664 Fax:  757-547-2100
Copyright © 1990-2010 Reef Scuba Accessories, Inc., 905 Shillelagh Rd Bldg 2, Chesapeake, VA 23323 USA
  All rights reserved worldwide.
Revised: January 29, 2010